Children's bicycles refer to bicycles that are suitable for children aged 4-8, with a maximum saddle height of 435mm~635mm, and ride on the driving mechanism acting on the rear wheel. There are various wheel diameters and styles with or without balance wheels. Children's bicycles cannot be used for road riding.
If the size is too large, the child will not be able to hold the handbrake tightly when braking, and will not be able to stop the car. So it is best to take your children to try it out when shopping. In addition, the braking force shall not be less than 50N. Otherwise, the vehicle will not stop, causing harm to children. Children’s bicycles are also equipped with protective wheels (balance wheels), which can keep the rider in balance, so pay attention to whether it is equipped (one on each side) when purchasing, and do not dismantle it when using it. Parents should purchase and use the time. It is necessary to consider this.
Children's bicycle selection guide
Children's bicycle products are products related to children's safety. In 2003, the relevant departments of our country promulgated the "National Toy Safety Technical Code" standard, and introduced mandatory product certification for toy products, to maximize the protection of children's lives and health and safeguard consumers Interests. The concept of toy safety is that under normal use or foreseeable and reasonable abuse, children can avoid injury to children due to certain defects of the toy itself, which may come from design, manufacturing process, or manufacturing materials. Inspect key components in accordance with relevant regulations. The safety-related stroller products include children's bicycles, children's tricycles, strollers, baby walkers, toy bicycles, electric strollers and other toy vehicles. Some of these vehicles are mainly pushed and supported by adults, such as strollers. Some are mainly operated by children themselves, such as children's bicycles and tricycles. These vehicles not only have some small parts, but also functional parts such as armrests and conveyor belts. Once these parts have quality problems or malfunctions, they will not only affect the use of the vehicles, but also seriously threaten the personal safety of children. . Therefore, consumers should pay special attention to the inspection agency for the following key components when buying baby stroller toys. For toy strollers, toy four-wheeled strollers, toy bassinets and similar toys that have handles or other folding mechanism components in accordance with relevant standards, if the handles or other structural components may fold and press on the child, at least one primary locking device And a secondary locking device, the two devices should directly act on the folding mechanism; when the toy car is installed, at least one of the locking devices should be automatically locked. At the time of purchase, consumers must not only check whether there are enough devices, but also carefully check their quality. There have been accidents where the armrest of the stroller failed and the child's hand was pinched.
Drive chain or belt. The drive chain or belt of a children's bicycle should be protected with a protective cover to make it inaccessible. The protective cover should not be able to be removed without using tools, such as bicycle roulettes and chains. Reporters often see children's bicycles that do not meet this requirement in some small commodity markets. The children are active and curious. Once they put their hands into the rotating roulette, the consequences would be disastrous.
